Frequently Asked Questions
-
10
280513
Frequently Asked Questions
Replies
GS
Gabriel Stadler
01 Sty 2020
Hi
Do you have experience with a magnetic stiier for the IC? Is it possible to use with the drops (method 2) or could it affect the IC in the water?
Thank you. Best regards.
Gabriel
Hi
Do you have experience with a magnetic stiier for the IC? Is it possible to use with the drops (method 2) or could it affect the IC in the water?
Thank you. Best regards.
Gabriel
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
GO
Giovanni Occhiochiuso
24 Gru 2019
Hi Anton I am John again, two of my IC programs crash, "Anti age cancer complex" and "Comprehensive multi vitamins and minerals formula"
Hi Anton I am John again, two of my IC programs crash, "Anti age cancer complex" and "Comprehensive multi vitamins and minerals formula"
Lubię to
Polubiono
Odpowiedz
0
0 odpowiedzi
Ukryj wątek
GO
Giovanni Occhiochiuso
20 Gru 2019
Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do... Zobacz więcej
Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do I have to make two separate transfers and then mix them?
Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do... Zobacz więcej
Hi Anton I am John from Italy, thanks for the prompt intervention, I see that it is working very well. I have another question to understand: when I finish transferring frequencies with my IC Complex and I want to add another combination of ICs in the same water what should be done, what is the most appropriate procedure? 1) Can I transfer more programs in the same water? 2) Do I have to make two separate transfers and then mix them?
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
GO
Giovanni Occhiochiuso
19 Gru 2019
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC... Zobacz więcej
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC off and on several times but your program freezes at 99%, what does it depend on?
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC... Zobacz więcej
Hi Anton, I am John from Italy, I've been using the IC Glowing Pad for several days since I bought it. So far it has always worked wonderfully but tonight when I loaded the frequencies, the program loaded up to 99% and froze. I don't understand what it can depend on. The Glowing Pad is loaded, I have a super-performing PC with which I work. I have turned the PC off and on several times but your program freezes at 99%, what does it depend on?
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
GS
Gabriel Stadler
12 Gru 2019
Is there a minimum amount of water for the 10 IC drops (Method 2)?
Thank you. Best regards Gabriel
Pokaż tłumaczenie
Is there a minimum amount of water for the 10 IC drops (Method 2)?
Thank you. Best regards Gabriel
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
LL
Lisa Lockwood
08 Gru 2019
There is a naltrexone infoceutical. In the description, it describes both naltrexone and low dose naltrexone. Which effect does it have? Also, can it be combined with one of the opioid frequencies or do they cancel each other out?
Pokaż tłumaczenie
There is a naltrexone infoceutical. In the description, it describes both naltrexone and low dose naltrexone. Which effect does it have? Also, can it be combined with one of the opioid frequencies or do they cancel each other out?
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
Lidia Irina Muntean
07 Gru 2019
Hi Anton! I add ease-pemf in my IC complex and the transfer time went from 12 minute to around 4 minutes. Can put together substances based ic-s with pemf on the same complex( water) or have to download first the ic that I use and after that download in the same water the pemf. Thank you!
Hi Anton! I add ease-pemf in my IC complex and the transfer time went from 12 minute to around 4 minutes. Can put together substances based ic-s with pemf on the same complex( water) or have to download first the ic that I use and after that download in the same water the pemf. Thank you!
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
ML
Mark Lee
04 Gru 2019
Hi is it possible for me to create or request an IC that is not currently available?
Hi is it possible for me to create or request an IC that is not currently available?
Lubię to
Polubiono
Odpowiedz
2
1 odpowiedź
Ukryj wątek
IB
Irene Bernstein
22 Lis 2019
Anton,
It worked.
Thank you,
Irene.
Pokaż tłumaczenie
Anton,
It worked.
Thank you,
Irene.
Lubię to
Polubiono
Odpowiedz
2
0 odpowiedzi
Ukryj wątek
IB
Irene Bernstein
21 Lis 2019
Good Morning,
I was trying to use my glowing pad this morning and seems it did not work properly. It stopped loading at 99% and just continue doing something. Never started count down. Any suggestions?
Thank you, Irene.
Pokaż tłumaczenie
Good Morning,
I was trying to use my glowing pad this morning and seems it did not work properly. It stopped loading at 99% and just continue doing something. Never started count down. Any suggestions?
Thank you, Irene.
Lubię to
Polubiono
Odpowiedz
2
1 odpowiedź
Ukryj wątek
DU
Dorothy Ulner
20 Lis 2019
Can I add liquid magnesium or boron to my water?
Can I add liquid magnesium or boron to my water?
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
Cody Boyd
08 Lis 2019
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters... Zobacz więcej
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters... Zobacz więcej
Hey Anton, has there been any studies on using the icpad with hydrogen rich water? I have a hydrogen generator water bottle and I'm wondering what steps should be first, to use the pad first or after? Also how far off of the pad can the water be and can the signals pass threw other materials rather than glass? And I'm also curious if this technology works well with translighters technology. Any studies with that? Thanks!
Lubię to
Polubiono
Odpowiedz
1
1 odpowiedź
Ukryj wątek
Załaduj więcej komentarzy...
Proszę wybrać język
Wybierz
Skontaktuj się z nami
Twoja wiadomość jest prywatna. Odpowiemy e-mailem w ciągu 48 godzin. Zobacz moje zgłoszenia
Twoja wiadomość została wysłana.
Odpowiemy e-mailem w ciągu 48 godzin. Dziękujemy!
Gotowe