I have used frequency therapies for a quite a few years now and found them to be very effective. Separately I have been making craft chocolate from bean-to-bar that is available commercially. My intention has been to infuse the chocolate with frequencies and I'm now getting to point where I'm ready to incorporate the step of imprinting the chocolate. I think the optimal time to do it is after the... Ver más
I have used frequency therapies for a quite a few years now and found them to be very effective. Separately I have been making craft chocolate from bean-to-bar that is available commercially. My intention has been to infuse the chocolate with frequencies and I'm now getting to point where I'm ready to incorporate the step of imprinting the chocolate. I think the optimal time to do it is after the chocolate has been removed from the molds. The bars/pieces rest at room temperature for about 20 minutes before packaging.
1. I don't know whether it would be better to imprint the chocolate before packaging or after. The packaging material varies. Sometimes it's foil, sometimes paper/cardboard and food safe polypropylene clear bags. I'm leaning toward imprinting before but would like other opinions.
2. I was thinking of keeping the imprint frequencies simple with 528Hz or Rose Quartz, but I am open to other ideas, if anyone would like to offer their thoughts. My intention is to promote an improved sense of wellbeing.
3. What kind of system can I set up to impart the frequencies to a tray of about 20 bars at a time. I have an FSM device and could probably use a conductive mat, but I feel more drawn to using Infopathy. I have a Glowing IC Pad. Is there some way to disperse the light and frequencies over an area larger than the pad itself?
4. I would like to include on the packaging that the chocolate has been imprinted. For the Infopathy Team, what is your preferred way to label the processing ingredient of Infopathy ICs, if at all.
Thank you in advance!
1. I don't know whether it would be better to imprint the chocolate before packaging or after. The packaging material varies. Sometimes it's foil, sometimes paper/cardboard and food safe polypropylene clear bags. I'm leaning toward imprinting before but would like other opinions.
2. I was thinking of keeping the imprint frequencies simple with 528Hz or Rose Quartz, but I am open to other ideas, if anyone would like to offer their thoughts. My intention is to promote an improved sense of wellbeing.
3. What kind of system can I set up to impart the frequencies to a tray of about 20 bars at a time. I have an FSM device and could probably use a conductive mat, but I feel more drawn to using Infopathy. I have a Glowing IC Pad. Is there some way to disperse the light and frequencies over an area larger than the pad itself?
4. I would like to include on the packaging that the chocolate has been imprinted. For the Infopathy Team, what is your preferred way to label the processing ingredient of Infopathy ICs, if at all.
Thank you in advance!
Llevo varios años usando terapias de frecuencia y me han resultado muy efectivas. Por otro lado, he estado elaborando chocolate artesanal, desde el grano hasta la barra, disponible comercialmente. Mi intención ha sido infusionar el chocolate con frecuencias y ahora estoy a punto de incorporar el paso de la impresión. Creo que el momento óptimo para hacerlo es después de desmoldar el chocolate. Las barras/piezas reposan a temperatura ambiente durante... Ver más
Llevo varios años usando terapias de frecuencia y me han resultado muy efectivas. Por otro lado, he estado elaborando chocolate artesanal, desde el grano hasta la barra, disponible comercialmente. Mi intención ha sido infusionar el chocolate con frecuencias y ahora estoy a punto de incorporar el paso de la impresión. Creo que el momento óptimo para hacerlo es después de desmoldar el chocolate. Las barras/piezas reposan a temperatura ambiente durante unos 20 minutos antes de envasarlas.
1. No sé si sería mejor sellar el chocolate antes o después del envasado. El material del envase varía. A veces es papel de aluminio, a veces papel/cartón y bolsas transparentes de polipropileno aptas para alimentos. Me inclino por sellar antes, pero me gustaría conocer otras opiniones.
2. Estaba pensando en mantener las frecuencias de impresión simples con 528 Hz o Cuarzo Rosa, pero estoy abierto a otras ideas si alguien quiere compartir su opinión. Mi intención es promover una mayor sensación de bienestar.
3. ¿Qué tipo de sistema puedo configurar para aplicar las frecuencias a una bandeja de unas 20 barras a la vez? Tengo un dispositivo FSM y probablemente me vendría bien una esterilla conductora, pero me atrae más usar Infopatía. Tengo una almohadilla IC luminosa. ¿Hay alguna manera de dispersar la luz y las frecuencias en un área mayor que la propia almohadilla?
4. Me gustaría incluir en el empaque la impresión del chocolate. Para el equipo de Infopath, ¿cuál es su forma preferida de etiquetar el ingrediente de procesamiento de los IC de Infopath, si es que se usa?
¡Gracias de antemano!
1. No sé si sería mejor sellar el chocolate antes o después del envasado. El material del envase varía. A veces es papel de aluminio, a veces papel/cartón y bolsas transparentes de polipropileno aptas para alimentos. Me inclino por sellar antes, pero me gustaría conocer otras opiniones.
2. Estaba pensando en mantener las frecuencias de impresión simples con 528 Hz o Cuarzo Rosa, pero estoy abierto a otras ideas si alguien quiere compartir su opinión. Mi intención es promover una mayor sensación de bienestar.
3. ¿Qué tipo de sistema puedo configurar para aplicar las frecuencias a una bandeja de unas 20 barras a la vez? Tengo un dispositivo FSM y probablemente me vendría bien una esterilla conductora, pero me atrae más usar Infopatía. Tengo una almohadilla IC luminosa. ¿Hay alguna manera de dispersar la luz y las frecuencias en un área mayor que la propia almohadilla?
4. Me gustaría incluir en el empaque la impresión del chocolate. Para el equipo de Infopath, ¿cuál es su forma preferida de etiquetar el ingrediente de procesamiento de los IC de Infopath, si es que se usa?
¡Gracias de antemano!
- Imprint before packaging. Metal can interfere with imprinting and fields. Since foil is metal, imprint first and then wrap.
- Store finished bars away from strong EMF sources, direct sun, and high heat to help preserve the imprint over time (similar caution given for imprinted stickers regarding sunlight/heat) .
If... Ver más
- Imprint before packaging. Metal can interfere with imprinting and fields. Since foil is metal, imprint first and then wrap.
- Store finished bars away from strong EMF sources, direct sun, and high heat to help preserve the imprint over time (similar caution given for imprinted stickers regarding sunlight/heat) .
If you want to keep it simple and broadly supportive, two good, verified options are:
Note: You can certainly use single tones like 528 Hz or gemstone-themed ICs if listed, but the two above are already curated for broad, feel‑good effects. For stronger imprint perception, some users repeat the imprint 2–3 times on the same batch .
- Coverage: The IC Pad’s PEMF field propagates roughly 10 inches around the pad; intensity decreases with distance.
But to have even effect along the layers, you can stuck bars up to 2 inches (it could be 5 bars). To make 20 you can get extra 3 GlowPads and connects them with audio splitter (they will emit same IC at the same time, so you will have larger area in this way). You can send us email at support@infopathy.com we can provide some discount for buying 3+ devices.
If you have any questions, please let me know.
- Imprima antes del empaque. El metal puede interferir con la impresión y los campos. Dado que el papel de aluminio es metálico, imprima primero y luego envuelva.
- Guarde las barras terminadas lejos de fuentes EMF fuertes, luz solar directa y calor intenso para ayudar a preservar la impresión a lo largo del tiempo (se debe tener precaución... Ver más
- Imprima antes del empaque. El metal puede interferir con la impresión y los campos. Dado que el papel de aluminio es metálico, imprima primero y luego envuelva.
- Guarde las barras terminadas lejos de fuentes EMF fuertes, luz solar directa y calor intenso para ayudar a preservar la impresión a lo largo del tiempo (se debe tener precaución similar para las calcomanías impresas con respecto a la luz solar y el calor).
Si desea mantenerlo simple y con amplio apoyo, dos buenas opciones verificadas son:
Nota: Puedes usar tonos individuales como 528 Hz o circuitos integrados con temática de gemas si están disponibles, pero los dos anteriores ya están diseñados para lograr efectos amplios y agradables. Para una mayor percepción de la impresión, algunos usuarios repiten la impresión 2 o 3 veces en el mismo lote.
- Cobertura: El campo PEMF del IC Pad se propaga aproximadamente 10 pulgadas alrededor del pad; la intensidad disminuye con la distancia.
Para un efecto uniforme en las capas, puedes pegar barras de hasta 5 cm (podrían ser 5 barras). Para completar 20, puedes conseguir 3 GlowPads adicionales y conectarlos con un divisor de audio (emitirán el mismo IC simultáneamente, lo que te permitirá tener un área más grande). Puedes enviarnos un correo electrónico a support@infopath.com y te ofreceremos un descuento por la compra de 3 o más dispositivos.
Si tienes alguna pregunta, por favor házmelo saber.