글로우 패드 장치에서 Bluetooth 연결이 작동하지 않습니다
Groups
Community
Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
Wall post
Replies
Om
안톤 님, 안녕하세요. 조명은 켜져 있지만 진동이 발생하지 않습니다.
원문 보기
3
2 Comments
05/24
10Hz 미만 : 일반적으로 맥동이 매우 눈에 띄고 빛이 펄스하는 것처럼 보입니다. 10-25Hz 사이 : 맥동이 여전히 감지될 수 있지만 강도는 약합니다. 25-60Hz 사이 : 맥동을 감지하기가 매우 어려워집니다. 60Hz 이상 : 대부분의 사람들은 맥동 없이 지속적인 빛을 보게 됩니다.
0 회신
항목 숨기기
0 회신
항목 숨기기
open modal
감사합니다.
경험이 제출되었습니다!
경험이 제출되었습니다!
완료
언어를 선택하세요
선택
You can also watch this short video to learn on how to turn it back on: https://vimeo.com/944217062?share=copy
Or follow these steps:
1. Turn on IC Pad
2. Press and hold button for about 10 seconds. (keep holding even when white light goes off).
3. After 10 seconds indicator light will flash red. You can... 더 보기
You can also watch this short video to learn on how to turn it back on: https://vimeo.com/944217062?share=copy
Or follow these steps:
1. Turn on IC Pad
2. Press and hold button for about 10 seconds. (keep holding even when white light goes off).
3. After 10 seconds indicator light will flash red. You can remove your finger and device will turn off.
4. Turn on device and try to connect to your phone/tablet
Please make sure audio volume is set to maximum after starting the transfer.
Please let me know if that helped. Thank you!
이 짧은 동영상을 시청하여 다시 켜는 방법을 알아볼 수도 있습니다: https://vimeo.com/944217062?share=copy
또는 다음 단계를 따르십시오.
1. IC 패드를 켭니다
2. 버튼을 약 10초 동안 길게 누르세요. (백색등이 꺼지더라도 계속 누르고 있습니다.)
3. 10초 후에 표시등이 빨간색으로 깜박입니다. 손가락을 떼면 장치가 꺼집니다.
4. 기기를 켜고 휴대폰/태블릿에 연결해 보세요.
전송을 시작한 후에는 오디오 볼륨이 최대로 설정되어 있는지 확인하세요.
도움이 되었는지 알려주시기 바랍니다. 감사합니다!
이 짧은 동영상을 시청하여 다시 켜는 방법을 알아볼 수도 있습니다: https://vimeo.com/944217062?share=copy
또는 다음 단계를 따르십시오.
1. IC 패드를 켭니다
2. 버튼을 약 10초 동안 길게 누르세요. (백색등이 꺼지더라도 계속 누르고 있습니다.)
3. 10초 후에 표시등이 빨간색으로 깜박입니다. 손가락을 떼면 장치가 꺼집니다.
4. 기기를 켜고 휴대폰/태블릿에 연결해 보세요.
전송을 시작한 후에는 오디오 볼륨이 최대로 설정되어 있는지 확인하세요.
도움이 되었는지 알려주시기 바랍니다. 감사합니다!