I have used frequency therapies for a quite a few years now and found them to be very effective. Separately I have been making craft chocolate from bean-to-bar that is available commercially. My intention has been to infuse the chocolate with frequencies and I'm now getting to point where I'm ready to incorporate the step ofย imprinting the chocolate. I think the optimal time to do it is after the... Vedi altro
I have used frequency therapies for a quite a few years now and found them to be very effective. Separately I have been making craft chocolate from bean-to-bar that is available commercially. My intention has been to infuse the chocolate with frequencies and I'm now getting to point where I'm ready to incorporate the step of imprinting the chocolate. I think the optimal time to do it is after the chocolate has been removed from the molds. The bars/pieces rest at room temperature for about 20 minutes before packaging.
1. I don't know whether it would be better to imprint the chocolate before packaging or after. The packaging material varies. Sometimes it's foil, sometimes paper/cardboard and food safe polypropylene clear bags. I'm leaning toward imprinting before but would like other opinions.
2. I was thinking of keeping the imprint frequencies simple with 528Hz or Rose Quartz, but I am open to other ideas, if anyone would like to offer their thoughts. My intention is to promote an improved sense of wellbeing.
3. What kind of system can I set up to impart the frequencies to a tray of about 20 bars at a time. I have an FSM device and could probably use a conductive mat, but I feel more drawn to using Infopathy. I have a Glowing IC Pad. Is there some way to disperse the light and frequencies over an area larger than the pad itself?
4. I would like to include on the packaging that the chocolate has been imprinted. For the Infopathy Team, what is your preferred way to label the processing ingredient of Infopathy ICs, if at all.
Thank you in advance!
1. I don't know whether it would be better to imprint the chocolate before packaging or after. The packaging material varies. Sometimes it's foil, sometimes paper/cardboard and food safe polypropylene clear bags. I'm leaning toward imprinting before but would like other opinions.
2. I was thinking of keeping the imprint frequencies simple with 528Hz or Rose Quartz, but I am open to other ideas, if anyone would like to offer their thoughts. My intention is to promote an improved sense of wellbeing.
3. What kind of system can I set up to impart the frequencies to a tray of about 20 bars at a time. I have an FSM device and could probably use a conductive mat, but I feel more drawn to using Infopathy. I have a Glowing IC Pad. Is there some way to disperse the light and frequencies over an area larger than the pad itself?
4. I would like to include on the packaging that the chocolate has been imprinted. For the Infopathy Team, what is your preferred way to label the processing ingredient of Infopathy ICs, if at all.
Thank you in advance!
Utilizzo le terapie frequenziali da diversi anni e le trovo molto efficaci. Parallelamente, produco cioccolato artigianale, dalla fava alla tavoletta, disponibile in commercio. La mia intenzione era quella di infondere il cioccolato con le frequenze e ora sono pronta a incorporare la fase di imprinting del cioccolato. Credo che il momento ottimale per farlo sia dopo aver tolto il cioccolato dagli stampi. Le tavolette/i pezzi di cioccolato riposano a temperatura... Vedi altro
Utilizzo le terapie frequenziali da diversi anni e le trovo molto efficaci. Parallelamente, produco cioccolato artigianale, dalla fava alla tavoletta, disponibile in commercio. La mia intenzione era quella di infondere il cioccolato con le frequenze e ora sono pronta a incorporare la fase di imprinting del cioccolato. Credo che il momento ottimale per farlo sia dopo aver tolto il cioccolato dagli stampi. Le tavolette/i pezzi di cioccolato riposano a temperatura ambiente per circa 20 minuti prima di essere confezionati.
1. Non so se sia meglio stampare il cioccolato prima o dopo il confezionamento. Il materiale di confezionamento varia. A volte รจ alluminio, a volte carta/cartone e sacchetti trasparenti in polipropilene per alimenti. Propenderei per la stampa prima, ma vorrei avere altri pareri.
2. Stavo pensando di mantenere le frequenze di imprinting semplici, con 528 Hz o Quarzo Rosa, ma sono aperto ad altre idee, se qualcuno volesse condividere il suo pensiero. Il mio intento รจ promuovere un migliore senso di benessere.
3. Che tipo di sistema posso configurare per trasmettere le frequenze a un vassoio di circa 20 barre alla volta? Ho un dispositivo FSM e probabilmente potrei usare un tappetino conduttivo, ma mi sento piรน attratto dall'uso di Infopathy. Ho un Glowing IC Pad. C'รจ un modo per disperdere la luce e le frequenze su un'area piรน ampia del tappetino stesso?
4. Vorrei specificare sulla confezione che il cioccolato รจ stato stampato. Per il team di Infopathy, qual รจ il modo che preferite per etichettare gli ingredienti di lavorazione dei circuiti integrati di Infopathy, se lo preferite?
Grazie in anticipo!
1. Non so se sia meglio stampare il cioccolato prima o dopo il confezionamento. Il materiale di confezionamento varia. A volte รจ alluminio, a volte carta/cartone e sacchetti trasparenti in polipropilene per alimenti. Propenderei per la stampa prima, ma vorrei avere altri pareri.
2. Stavo pensando di mantenere le frequenze di imprinting semplici, con 528 Hz o Quarzo Rosa, ma sono aperto ad altre idee, se qualcuno volesse condividere il suo pensiero. Il mio intento รจ promuovere un migliore senso di benessere.
3. Che tipo di sistema posso configurare per trasmettere le frequenze a un vassoio di circa 20 barre alla volta? Ho un dispositivo FSM e probabilmente potrei usare un tappetino conduttivo, ma mi sento piรน attratto dall'uso di Infopathy. Ho un Glowing IC Pad. C'รจ un modo per disperdere la luce e le frequenze su un'area piรน ampia del tappetino stesso?
4. Vorrei specificare sulla confezione che il cioccolato รจ stato stampato. Per il team di Infopathy, qual รจ il modo che preferite per etichettare gli ingredienti di lavorazione dei circuiti integrati di Infopathy, se lo preferite?
Grazie in anticipo!
ย - Imprint before packaging. Metal can interfere with imprinting and fields. Since foil is metal, imprint first and then wrap.ย
ย - Store finished bars away from strong EMF sources, direct sun, and high heat to help preserve the imprint over time (similar caution given for imprinted stickers regarding sunlight/heat) .
ย If... Vedi altro
- Imprint before packaging. Metal can interfere with imprinting and fields. Since foil is metal, imprint first and then wrap.
- Store finished bars away from strong EMF sources, direct sun, and high heat to help preserve the imprint over time (similar caution given for imprinted stickers regarding sunlight/heat) .
If you want to keep it simple and broadly supportive, two good, verified options are:
Note: You can certainly use single tones like 528 Hz or gemstone-themed ICs if listed, but the two above are already curated for broad, feelโgood effects. For stronger imprint perception, some users repeat the imprint 2โ3 times on the same batch .
- Coverage: The IC Padโs PEMF field propagates roughly 10 inches around the pad; intensity decreases with distance.
But to have even effect along the layers, you can stuck bars up to 2 inches (it could be 5 bars). To make 20 you can get extra 3 GlowPads and connects them with audio splitter (they will emit same IC at the same time, so you will have larger area in this way). You can send us email at support@infopathy.com we can provide some discount for buying 3+ devices.
If you have any questions, please let me know.
- Stampare prima dell'imballaggio. Il metallo puรฒ interferire con la stampa e i campi. Poichรฉ la lamina รจ metallica, stampare prima e poi avvolgere.
- Conservare le barre finite lontano da forti fonti di campi elettromagnetici, dalla luce solare diretta e da fonti di calore elevate per preservare l'impronta nel tempo (analoga cautela รจ data per gli adesivi stampati in... Vedi altro
- Stampare prima dell'imballaggio. Il metallo puรฒ interferire con la stampa e i campi. Poichรฉ la lamina รจ metallica, stampare prima e poi avvolgere.
- Conservare le barre finite lontano da forti fonti di campi elettromagnetici, dalla luce solare diretta e da fonti di calore elevate per preservare l'impronta nel tempo (analoga cautela รจ data per gli adesivi stampati in relazione alla luce solare/calore).
Se vuoi semplificare e dare un supporto generale, ecco due valide opzioni verificate:
Nota: รจ possibile utilizzare toni singoli come 528 Hz o circuiti integrati a tema gemma, se elencati, ma i due sopra sono giร stati selezionati per effetti ampi e piacevoli. Per una percezione piรน forte dell'impronta, alcuni utenti ripetono l'impronta 2-3 volte sullo stesso lotto.
- Copertura: il campo PEMF del pad IC si propaga per circa 10 pollici attorno al pad; l'intensitร diminuisce con la distanza.
Per ottenere un effetto uniforme lungo tutti gli strati, puoi incollare barre fino a 5 cm (potrebbero essere 5 barre). Per ottenere 20 barre, puoi acquistare 3 GlowPad extra e collegarli con uno splitter audio (emetteranno lo stesso circuito integrato contemporaneamente, ottenendo cosรฌ un'area piรน ampia). Puoi inviarci un'e-mail a support@infopathy.com e ti offriremo uno sconto per l'acquisto di 3 o piรน dispositivi.
Se avete domande, non esitate a contattarmi.