Welcome to our vibrant online community, where we encourage members to share their personal experiences and insights to foster collective growth and mutual support in our journey towards well-being.
How do I turn off the sound of the frequency when I'm doing a PEMF transfer? It is so loud and grating and I can't stand listening to it for the duration of the transfer. Is there a simple way to turn it off?
Anton SF Thanks Anton but it's still making the sound, whether I have it plugged in to my phone through the jack or by bluetooth from my computer. I am using a brand new glowing IC pad I just purchased from the Infopathy website. I am frustrated and disappointed. I have tried closing everything and reopening, plugging and unplugging, switching from plug to bluetooth rtc but nothing is working.
Anton SF Thanks Anton but it's still making the sound, whether I have it plugged in to my phone through the jack or by bluetooth from my computer. I am using a brand new glowing IC pad I just purchased from the Infopathy website. I am frustrated and disappointed. I have tried closing everything and reopening, plugging and unplugging, switching from plug to bluetooth rtc but nothing is working.
Tanis Day, sorry about that delayed reply. Please let me know what laptop are you using? Is it MacBook? If so, once GlowPad is connected to your laptop via bluetooth, on your Mac, please go to Settings -> Sound -> Output tab and select "Infopathy GlowPad".
Tanis Day, sorry about that delayed reply. Please let me know what laptop are you using? Is it MacBook? If so, once GlowPad is connected to your laptop via bluetooth, on your Mac, please go to Settings -> Sound -> Output tab and select "Infopathy GlowPad".
Anton SF Hi Anton, I'm using an iPhone or a Mac mini. In the Mac mini settings, there is no option for the glow pad. It isn't showing up in the list. And it still makes the noise when I start a transfer. On the iPhone I connected by bluetooth and it might be working. It's transferring a PEMF without noise, BUT the lights aren't flickering, just constantly on. I've... Zobacz więcej
Anton SF Hi Anton, I'm using an iPhone or a Mac mini. In the Mac mini settings, there is no option for the glow pad. It isn't showing up in the list. And it still makes the noise when I start a transfer. On the iPhone I connected by bluetooth and it might be working. It's transferring a PEMF without noise, BUT the lights aren't flickering, just constantly on. I've tried different PEMFS and there is no flickering so I assume it's still not working right. I have tried setting the audio for 'speakers', or 'other', and it makes no difference. No flickering, so no real transfer. Solved the noise but still not getting the benefit.
Tanis Day, it is normal that lights are constantly On on the GlowPad for many ICs (usually PEMF ICs). For the Mac mini - please try to restart GlowPad and Mac mini. It should be appearing in the list of Bluetooth devices. Usually on Mac, when you click on Bluetooth Icon at the top right, it only shows previous connected devices only, to connect new device you need to... Zobacz więcej
Tanis Day, it is normal that lights are constantly On on the GlowPad for many ICs (usually PEMF ICs). For the Mac mini - please try to restart GlowPad and Mac mini. It should be appearing in the list of Bluetooth devices. Usually on Mac, when you click on Bluetooth Icon at the top right, it only shows previous connected devices only, to connect new device you need to select Bluetooth Settings... and then in opened window scroll down, it will be searching for new devices.
Anton SF I am SO frustrated Anton. I have my glowpad connected to my Mac-mini by bluetooth and yet when I start a transfer, all the noise comes with it. There is a volume slide and I put it to the bottom so the sound disappears, but after a few seconds it automatically restores itself to maximum volume! I am totally unable to use my infopathy system. As far as... Zobacz więcej
Anton SF I am SO frustrated Anton. I have my glowpad connected to my Mac-mini by bluetooth and yet when I start a transfer, all the noise comes with it. There is a volume slide and I put it to the bottom so the sound disappears, but after a few seconds it automatically restores itself to maximum volume! I am totally unable to use my infopathy system. As far as I'm concerned, it is an expensive piece of junk. I have not had one single transfer since it arrived! I don't understand why it will not work for me!! I have tried everything.
Anton SF Jestem TAK sfrustrowany, Anton. Mój lightpad jest podłączony do mojego Maca mini przez Bluetooth, a mimo to, gdy zaczynam transfer, słychać cały ten hałas. Jest suwak głośności, który odkładam na dół, żeby dźwięk zniknął, ale po kilku sekundach automatycznie wraca do maksymalnej głośności! Nie mogę w ogóle korzystać z mojego systemu Infopathy. Moim zdaniem, to drogi złom. Odkąd go dostałem, nie zrobiłem ani jednego transferu! Nie rozumiem, dlaczego... Zobacz więcej
Anton SF Jestem TAK sfrustrowany, Anton. Mój lightpad jest podłączony do mojego Maca mini przez Bluetooth, a mimo to, gdy zaczynam transfer, słychać cały ten hałas. Jest suwak głośności, który odkładam na dół, żeby dźwięk zniknął, ale po kilku sekundach automatycznie wraca do maksymalnej głośności! Nie mogę w ogóle korzystać z mojego systemu Infopathy. Moim zdaniem, to drogi złom. Odkąd go dostałem, nie zrobiłem ani jednego transferu! Nie rozumiem, dlaczego u mnie nie działa!! Próbowałem wszystkiego.
I would like to get my money back if possible. I am totally frustrated by the constant noise. It isn't how my friend's glowpad works. Maybe mine is defective.
Chciałbym odzyskać pieniądze, jeśli to możliwe. Jestem strasznie sfrustrowany ciągłym hałasem. Świecący pad mojego znajomego tak nie działa. Może mój jest uszkodzony.
Tanis Day, sorry for the frustration. Please try the following, it should help: After you connect GlowPad 3 to your Mac computer via Bluetooth and it is not glowing during transfer, please go to Settings -> Sound -> Output tab and select "Infopathy GlowPad". Also please make sure the audio volume is not zero. image.png381 KBYou can also watch this video starting around 15:00 https://vimeo.com/934546088
Tanis Day, sorry for the frustration. Please try the following, it should help: After you connect GlowPad 3 to your Mac computer via Bluetooth and it is not glowing during transfer, please go to Settings -> Sound -> Output tab and select "Infopathy GlowPad". Also please make sure the audio volume is not zero. image.png381 KBYou can also watch this video starting around 15:00 https://vimeo.com/934546088
Tanis Day Przepraszamy za frustrację. Spróbuj poniższych rozwiązań, powinno pomóc: Po podłączeniu GlowPad 3 do komputera Mac przez Bluetooth i braku podświetlenia podczas przesyłania danych, przejdź do Ustawień -> Dźwięk -> zakładka Wyjście i wybierz „Infopathy GlowPad”. Upewnij się również, że głośność dźwięku nie jest ustawiona na zero. image.png381 KB Możesz również obejrzeć ten film od około 15:00 https://vimeo.com/934546088
Daj znać czy to pomogło.
Dziękuję!
Tanis Day Przepraszamy za frustrację. Spróbuj poniższych rozwiązań, powinno pomóc: Po podłączeniu GlowPad 3 do komputera Mac przez Bluetooth i braku podświetlenia podczas przesyłania danych, przejdź do Ustawień -> Dźwięk -> zakładka Wyjście i wybierz „Infopathy GlowPad”. Upewnij się również, że głośność dźwięku nie jest ustawiona na zero. image.png381 KB Możesz również obejrzeć ten film od około 15:00 https://vimeo.com/934546088
Cześć, właśnie dowiedziałem się, że istnieje opcja zdalna... jak mogę uzyskać do niej dostęp? Nie widzę jej wśród moich opcji... Ale jest dostępna u moich znajomych. Dzięki.